Announcement

Collapse

Not logged in, registered users

If you are fed up with seeing lots of adverts on Talk Angling, the way to get rid of them is REGISTER HERE as a member and then 95% of the adverts on the site will go away!
See more
See less

Making a Paste Pot from a feeding Pot

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Making a Paste Pot from a feeding Pot

    Hi Guys

    I have an old Frenzee Cupping Kit pot and I was just wondering how easy it is to make a paste pot out of it. It has a thread on one side so it may need to be cut off first. The pot also seems soft to squeeze onto the top kit. The bottom of the pot is rigid though so if I cut a groove into the bottom I would have to slide it on and off the top kit as it seems that this bit of the pot can't be squeezed.

    Regards

    Preston_Mark
    Mark

    "At the end of the day it's another day over" Les Misérables - Victor Hugo

  • #2
    I’d just buy a bag of sonubaits paste,mark.
    You get a free paste pot in the bag 😎
    Team south- 2014 talk angling inter regional team champs
    Alwight tweacle?

    Comment


    • #3
      I have a spare paste pot mate, PM me your Addy & I'll stick in the post.
      [B]Fishin' Best Fun Ya' Can 'ave wi' Ya' Clothes On!![/B] And Can't do with sycophants!!.

      Comment


      • #4
        Originally posted by paul k View Post
        I’d just buy a bag of sonubaits paste,mark.
        You get a free paste pot in the bag 😎
        Yep that's where mine are from.
        [B]Fishin' Best Fun Ya' Can 'ave wi' Ya' Clothes On!![/B] And Can't do with sycophants!!.

        Comment


        • #5
          Thanks Martin
          Mark

          "At the end of the day it's another day over" Les Misérables - Victor Hugo

          Comment


          • #6
            You may as well buy the Sonubaits paste...and get both at the same time

            Comment


            • #7
              Have you got normal feed/toss/kinder pots?
              If so,use one of those,there's nothing special about a paste pot,it's the same thing.

              Comment


              • #8
                My CAD pots are too small for paste fishing
                Mark

                "At the end of the day it's another day over" Les Misérables - Victor Hugo

                Comment


                • #9
                  Originally posted by maverboy View Post
                  Have you got normal feed/toss/kinder pots?
                  If so,use one of those,there's nothing special about a paste pot,it's the same thing.
                  They actually come in 3 hole sizes for fishing different depths, so might be better with the full set of 3 (the hole size determines how far up the top kit it slides)

                  I'm guessing the Freebie in the bag of paste mix would be the middle hole size?? See the Link below.

                  https://www.googleadservices.com/pag...9A4IggE&adurl=
                  [B]Fishin' Best Fun Ya' Can 'ave wi' Ya' Clothes On!![/B] And Can't do with sycophants!!.

                  Comment


                  • #10
                    get a preston mega toss pot, big enough for anything

                    Comment

                    Working...
                    X